What can I expect to gain or lose by
using a 250 crank with 230 rods and pistons.
Thanks, Rich

The pistons will not work,they have a different pin height.

Hank

Rich

The Pistons will be out the TOP of the BLOCK. The Rods are the same. Hope this helps.

M# 3220 }[oooooo]

Thanks Guys, I have a 230 crank and also the 250 crank. Looks like the 250 crank will be collecting dust for a while.
Thanks, Rich

Dear Rich;

Why not use the 250 crank to get the cubes + overbore pistons to match??

You should end up with 250 CID+.

Good luck, John M......