Where can I find a list of Chrysler Castings Numbers Or does anyone have a list to tell me what engines that I have.

Don,
Send me a list of your engine numbers. I'll see if I can identify them.

Hello Don,
You do'nt say exactly what type of engines you have (and approximate age),so I wo'nt be any more specific with the information than this deep into the site.
click here for info
There is a wealth of stuff to do with Mopar in this site.

regards,Rod

Good point, I only have numbers for inline flathead MOPARs

The motor is a chrysler 6 cly flathead block # 1315529-2 with 727 above it head # 1120803-2 thanks for any info you have Don

Don, is it the long block or short---app.23 inch and 25 inch at the head. The Canada stuff had a bunch of different cube engines the US short blocks had the 218-230 for instance and the long blocks were in the Desotos and Chrysler--251 and 265 the Chrysler blocks were the only ones to have the SPITFIRE ON THE HEAD---the Canada blocks had long blocks with smaller cubes also---of course the serial #`s will give you what you need. How many engines do you have?? Lee

Don,

I need the number stamped on the block boss located just below the cylinder head and behind the water pump on the ignition side of the block. I do not need the casting numbers on the ignition side of the blocki. It should have something like "T38XXXX" or "DXXXX" or "Pxxxx" or "Sxxxx" or "INDxxx"

Thnaks

37 dodge That number is T245-22966 thank you again

Here's a site that will be very helpful. Looks like the T245 was a 23" block at 230 cubic inches. It appeared to be used on military vechicles. This engine would be a good swap for most '39 - '59 Plymouth or Dodge cars and trucks.

http://t137.com/registry/help/otherengines/tengines.html

I have a 1935 KH-32 V. The maintenance manuals I have list either a KH30-V or a K32-V. Can someone decipher the model numbers for me? What does the "H" represent. And the "30" vs. the "32"?

The truck has a 201 cu. in. engine, which according to the maintenance manual is the same as the KH30-V. The K32-V has a 218 cu. in. Does this mean I should follow the data for the KH30-V?

I'd like to get some assistance (and double checking) of the truck and engine information for my 1935 Dodge KH-32 V Truck:

body tag: B-3-0-LR15988
B-3-0 = cab for a chassis cowl KH-32V (mid size truck with just the sheet metal from the dash forward, no windshield)
15988 = sequential number in B-3-0 sequence

build date: between June and October 1935

engine numbers
casting date: 8-12 = August 12, 1935????
casting number (is this the correct term?): 882929-2 = ????
engine number (left side of engine block, at front, below the cylinder head): T-13-7512
T = truck engine
T13: Make = Dodge Truck, Model = KH 16-18-V, KH 21-23-V, KH31-33-V
Year = 1935
6,512th engine built
lower casting (is this the correct term?): 107 = ????

engineering code: T-13-E
T = truck, 23" long, 201 ci
E = 1-1/2 ton

serial number: 823990