Well as some of you may know I uust broke my engine in and I now have a slightcoolant leak from atleast one head bolt I know I can take the head off and put a new gasket onand reseal the studs but it hit my motivation pretty hard is there something I can do other than that? Not giing cheap just want to hear opinions please
happy inlining!
Pull the one stud and reseal just that one.
yep, 1 stud, drain antifreeze,clean out hole with starting fluid, use arp sealer, let it set for a few hours
Does the 292 use a head bolt washer?
So i think i would feel much more comfortable taking the head off replacin the gasket and resealing the studs with arp sealer this wouldn't hurt any thing would it?
If you are going to remove the cylinder head entirely, then cleaning the deck surface on the block and head along with a new head gasket and sealing the threads in the water jacket, you should be as good as new.
Soundsgood to me:) i have the gasket just waitinf for the sealer and i will have her done!:)