Another thing I have to figure out is the return and how Im going to do that. The 6an fitting on top is for a return, I have to check but I think there isn't a line down to the bottom of the tank. I could try and see if a I can get a plastic tube to fit through the fitting and reach the bottom of the tank, worth a try. The tank I got has a block of foam in it to prevent fuel slosh and splashing. Not sure if a tube would even be needed.
If I can't get the return to go back in through the tank, I have a few other ideas. 1 is to put a Tee in the line before the pre-filter and feed the return in before the filter. I could also use the second fitting on the bottom for the return, but I was wondering if it would be a problem with the fuel flowing back up through the return when the pump is off. I don't think there would but I figured Id ask.
