Well I had put this build off for a while so I could do some work on another project but I'm about ready to start with building my 292.
Took it to the machine shop and somebody has previously rebuilt it and all 6 cylinders are already sleeved. He mic'd em and they aren't out of round so I'll be able to use stock pistons.
I found several at Summit racing but was unsure if any of them would help raise CR they range from roughly 1.9 to 2.0 compression distance. I also looked at having some made for me from Flatlander racing. Has anybody had experience with them or advice on where I can find good stock size pistons I really don't want to bore the block since I don't have to.
