If that is a stock sized damper, I would venture to say it would not be as good as a bigger unit.

I used to go through stock dampers left & right, the previous owner of my Camaro did as well.

They would just shake loose, cause the engine to vibrate.

I just got so tired of them coming loose & not being able to RPM, no matter what camshaft I installed (cams up to 244 degrees duration @ .050") Max RPM it seemed to get w/power was 5800-6000 (but laboring to get there) engine vibes!! eek
I just decided to try out a standard SBC 300HP 350 style damper.

Guess what happened? The engine totally smoothed out, the damper never shook off the crank & I was able to RPM the engine to 7500 + RPM.

So in short, my friend who owned my Camaro before me shook a few dampers off the engine.
I then shook a few dampers off the engine, about 4-5 myself.

Installed a standard SBC 8" damper 300 HP 350 style, bamm!!! no more vibes, & all the RPM I ever wanted out of my 250 6.

MBHD


12 port SDS EFI