I installed the mock-up engine in the Camaro to see if everything is going to clear brackets, mounts etc.
The turbo oil return needs a different fitting, I am going to try & find a banjo fitting, it is tight between the frame & the turbos oil return fitting. Back to the drawing board.
You can see the intercooler is installed, titanium bolts hold the upper tube brackets.
I cut & mocked up my breather can hoses. I ordered the wrong color, I wanted black but ordered blue by mistake.
I made a heater delete plate out of .080" aluminum.
Lots of room w/the rack & pinion steering installed.
I actually got one of my boys to help for a few minutes, hey,, it's a start!
Turbo oil return hose hooked up.
Had to modify Toms engine cradle, my 1.75" wastegate pipe would not clear.
Now I will work on it while it is in the car & try to do more work. Then take it out, back & forth a few times.
Now would be a good time to plumb some of the rack & pinion hoses & cooler. Still need to get a hydraboost set-up.
