I've been looking at intercoolers for the last 4 hours on eBay. The real estate behind the grille on my Camaro is quite limited as the lower bumper/hood latch support goes right up the middle and after some deliberation, I do not want to hack on it too much. So, The driver side alone allows for approximately 20"x13"x3.5". So I've found an intercooler measuring 18"x12"x3" with 3" inlet/outlets. I understand it's a bit on the small side but will it suffice for my needs? It will only cover 50% of the radiator which is a bonus. My only other option would to get a longer narrow one but it would need to be 2.5" thick instead of 3" and that means the inlet/outlet sizes get smaller too. Even going down to 2.5" thick means I will have to hack around an inch off the metal support. If I'm running 3" pipes everywhere it seems a shame to drop a 2.5" intercooler in. What do we think?
