First go at building a set of headers is moving along. Building the collector ended up more complicated than I had hoped, so hopefully it doesn't leak... I have a game plan of what I'm going to do differently, and better, making the next one. Basically for the next one I'm going to install a ring around the three pipes, seal it up on the three pipes and then weld the reducer to the ring. I may cut this collector off just before it reduces in diameter and re-weld some parts just to be sure it doesn't leak. Live and learn! The next three should go much easier as I'm pretty sure I've figured out what settings to use on the welder when simply welding versus filling gaps. Fun fun.