More work on the intake. The plates have been welded to the runners to strengthen them. I shouldn't blow the welds on my manifold, lol. I've picked up a set of injectors from Fuel Injector Development that should easily supply my fueling needs. Then started to remove the cooling system and core support to begin the mounting of a 2nd Gen F-body aluminum radiator and intercooler. The plan is to get a 55 gpm Meizier remote water pump to replace the 21 gpm Craigs-Davies one I currently have. I've ordered an IO extender board (Input/Output) to get more sensor inputs to make the setup live comfortably just off the ragged edge. I'll be monitoring crankcase pressure, coolant system pressure, exhaust back pressure, pre-intercooler pressure and temperature and post intercooler pressure and temperature, as well as engine oil pressure and lash adjuster oil pressure.
I don't have an updated picture, but I'm about to pull a fender or two to remove the core support. I'm on the fence between getting a pre-made tubular one that still would need a bunch of work or just hacking up this core support that isn't in the best of shape anyways. Looks like someone has jacked the car up by the bottom of it. http://i42.photobucket.com/albums/e313/T...zpsbzkinxjb.jpg
