I'm getting ready to install a 250 w/ clifford intake and headers in to my 67 C-10. I will be using a Holley 390cfm carb. The truck has the rod type linkage with the bell crank mounted on the old intake. What are you guys using for throttle linkage and kick down brackets? Pictures would be helpful. Thanks Todd
If you mount the carb inline with the Motor and not at 90degrees of it,You can pretty much use the stock Linkage Or just make up another rod Then go with a after market bracket for The ATV cable.Which mounts atteh rear of the carb. You can find them in just about any parts house, Jegs,
Larry/Twisted6 [oooooo] Adding CFM adds boost God doesn't like ugly.
I have ran both ways with little difference But some feel other wise. Many run it Inline just to make hooking up linkage simpler.I have gone and made carb plates for the Offey for guys who wanted to make it simple.
Larry/Twisted6 [oooooo] Adding CFM adds boost God doesn't like ugly.
Thanks for the pictures Brady, they were very helpful. P.S. nice Nova, I would like to find one for my son and I to work on like that some day. Good early Novas are hard to find, espesially original 6's. Thanks, Todd
Gooday Caroline & Jim & Lucinda our 3104 51-3100 inliner @ 4655 small wheel moves by fire and rod, big wheel moves by the grace of god, every time that wheel turns round, bound to cover just a little more ground.
God doesn't like ugly.
