Inliners International Forums General Discussion Drive Train L6 TO 700R4

Hi, has anyone out there put a 700 behind a 6cyl, and use the stock gm bell crank for the tv cable, then a lokar cable to the carb,(carb sitting sideways)... Thanks

I didn't put it together, but I thought I would let you know. My 1984 chevy c-10 pickup came stock from the factory with the 250CI (4.1L) and the 700R4 transmission. It was the last year for the 250 six inline. It is a nice setup the motor does not work hard on the highway.

Hey, thanks for the info,, could you tell me the carb,, and was it an integral head, or conventional, maybe a picture would be great,,, Greg...

carb is two barrel, throttle cable and another one comes from the trans (I figured it was the kick down). Yes motor is intragal head. I don't know what pics you want but I'll try.

Hi the pics I could use would be the tv cable area and bracketing & throttle setup to see if they could be modified for use on a split manifold setup,, being that it is stock I think the carb should be transverse, and I might be able to use the setup with some crafting,, thanks again