Inliners International Forums General Discussion MOPAR master cylinder

Hello. I have a 39 Ply coupe. I would like to change the master cylinder to a dual for saftey. Is there any aftermarket master cylinder that would bolt up for this application? I plan on keeping the drum brakes. I know about new lines, etc. Thanks

Dear Cole;

There's a Company that makes conversion kits that include a power booster and finding them (Jeggs-Summit) would be a start.

Take your time & plan this out. Some States have laws governing the modification of a vehicle's braking systems.

It's probably not worth all the effort involved for a 'tandum cylinder' alone.

Good luck.

I am not sure on your master if it is the one that has the pivot rod built into it.I f it does you have to leave it in and run a new rod thru the old back to your new master and bracket you will have to make. Then make adjustments for travel lenght on the rod for the new master to work. Older GM 1/2 ton trucks have masters that work well--just make sure you get one for drum all around--if you switch to disc up front adjust accordingly. Master Power Brake has a large assortment of masters for all applications. Good Luck........52er

Try
dual master