Hello!
I am about 5 months into a project I started. I have a Vortech 4200 out of a 2006 GMC Envoy. I have the following so far to the engine:
Forever Fabrication T shaded oil pan with pickup tube, turbo drain AN10 fitting and alloy dip stick
Forever Fabrication Turbo header with a wastegate pipe
Tial knockoff 44mm wastegate with 8 psi crack pressure
Custom one off intake manifold made with parts from DMZ, and a plenum made from 2 toyota 2jz plenums sold on ebay.
Valve cover cut down, welded and polished
Lime-Swap customized factory wiring harness, converted to a stand alone setup with Siemens Deka 60 lb. injectors, modded P12 Factory ECU
Atlas industries alternator relocation kit
4 core aluminum radiator with dual electric fans....I had pipes ran to opposite side top and bottom to hook up cleaner to the Atlas setup
AR5 transmission from a 2WD Chevy Colorado pickup, full reconditioned
Custom Emtech flywheel, ARP fasteners and a RAM Muscle Car clutch kit
RAM clutch pedal in line adjuster
FABBOT 4 inch back billet shifter
and much more! Once I figure out, I will post pics, and start updating as I work on it for those who are interested.
Thanks, Joe
P.M. How do I post pics?
