Took a while. Now have a roller rocker to fit under a stock valve cover. Small modification will need to be done to the internal baffle.
These fit 153-181-194-230-250-292

These are made to use with:

1 stock valve cover

2 stock 3/8 studs

3 stock pushrods

Lift is limited to .530 These are not made for BIG pressure springs

Works with our Performance spring kit and .550 springs

USA Made High Quality Roller Rockers

1.75 ratio for Chevy Inline 6 cylinder

For use on 3/8 stud press in type (factory style)

Under cut trunion for large springs

Relieved near pushrod for clearance.

High strength aluminum body

Large diameter trunion bearings for long life.

Front/rear rocker radiused to help clear valve cover.

Set of 12

If bigger lift is needed, use our 7/16 stud rockers , the weak point is the 3/8 stud.
The internal baffle in valve cover will need to be squished in the middle slightly.

[Linked Image]
[Linked Image]


Inliner Member 1716
65 Chevelle Wagon and 41 Hudson Pickup
Information and parts www.12bolt.com