usmile4 I have done this mod on my 235 and have some suggestions. When chusing a remote oil filter get one that has an internal bypass in it either in the filter or the head. This will insure oil pressure if the filter ever gets completely clogged. I installed a bracket in about the same position as the fuel pump on the opesite side of the block. I then attached the remote filter to that. I then plumed it in with hard tubing. This way all of the system is attached to the block and any movement is with the block.
Other than that the install is pretty straight forward just follow the instructions from the post that Drew,II posted and use sharp taps.
Good luck.
Tom
