Pesonaly There is nothing wrong with cliffords headers I ran them for about 10 years Before I started building my own. But for Long term Toms will out last them. as for pistons No matter whos you go with Just be sure they're Not Cast. As to the Head The 1.94i and 1.6e Besure to Unshroud them in the combustion chamber thats good for up about 20cfm Depending on how you go about unshrouding them. If you're talking about .060 over on the block why not do a .030 This way you can easily do a rebuild again If ever in need of one again. Unless you're just after the extra Cubes.
God doesn't like ugly.
