I noticed a small amount of motor oil weeping from the front bolt that holds the coil bracket to the side of the head. I pulled the bolt, and took a drive around the block, and it is indeed blowing a minor amount of oil as far as the inside of the inner fender. Is this hole tapped into the oil galley, or do I have something cracked in there? It seems that if it were tapped that way, it would blow huge amounts. I imagine a little teflon tape on the bolt will stop the minor weeping, and the motor pretty well holds about 20lbs. of oil pressure when warmed up. Am I going to have bigger problems down the road? No evidence of water in oil, or vise versa.
