Gearhead;
I used some lube the engine shop gave me.
I have primed the oil pump, i made a bit for the drill and primed it for 15 minutes.
The rpms where somewhere between 1000 and 1200 rpm fast idle.
Strangely the first time there was no card with the cam so i hope that this time there is one.
I know there is not much to gain with a M4F but that is not what i am looking for right now.
My intention is not to go over the 50 m/h.
And i want to keep the rpms around 4000 max.
so i am still looking for a small (max 2 inch) rpm and vacuum gauge for under the dash.
so i can monitor the engine while i am cruising along.
Dennis.
