Here's a link to Keith Black pistons you can use as a reference to find a piston you link. You don't have to use KB pistons.
http://www.kb-silvolite.com/spistons.php?action=diam This is their diametrical listing by bore size. Look up your 153 pistons, note bore, piston pin height, and wrist pin diameter. Then look up the bore you want with the correct height, and pin. It may not be a 350 piston you end up with could be 307, 283. You may want to pull your head off before order the pistons to see what your piston to block deck measurement is. It might be possible to change the piston pin height and get a zero deck. Hope this helps.
Larry
