Guys this is what I did on my 46 Chev for a fuel filter and it has worked quite well. Just before the fuel/vac pump i have installed a fuel filter/water seperator from a Bobcat skidsteer. It is a screw on canister type with a drain on the bottom for water. The bracket is made of Aluminum.It takes alot to plug these as with the inline clear filters it doesn't take much if ya have a rust problem in the tank. Easy to replace with no mess. I also ran a stainless fuel line from my pump to the carbs. And ran it between the therm. housing and water pump. I put the coil spring like you would find on steel brake line to act as cooling fins as the fuel line is super close to the head. This has also worked great and makes for a neater installation. If you are not sure what I am talking about as far as the filter goes you can pm me and i will email you a pic of it as I have no clue how to post pics on this site.
