Inliners International Forums General Discussion Engines 250 Frame Mounts -Buick

Need to know who sells 250ci frame mounts that will work in a 68 Skylark.

Thanks in advance.

Tom sells mounts for Chevy adaptation, but don't know if it's what you're looking for.

http://www.stoveboltengineco.com/index1.htm

http://www.stoveboltengineco.com/acartpro/category.asp?catcode=39

A set of stock Chevelle 250 Towers for the same year should bolt in. You may have to drill a hole or two but I think they are already there.
If the engine didn't come out of a Chevelle you would also need the brackets to bolt to the block and the proper mounts.
The towers/stands out of a 250 powered Chevelle from 68 to 72 should work. I think Pontiac used the 250 as it's 6 for the Lemans in some of those years also.

My 72 Chiltons manual shows the 68/72 Skylarks as having the 250 as an available engine. Also the 68/72 Olds F-85. The Pontiacs showed to run the ohc engine. To be honest, when I had my head under the hoods of those model cars every day of the week I don't remember a 6 in a Skylark or F-85.