Originally posted by carbking:
The fuel seeping from the seam is caused either by the warpage, or some misguided individuals attempt to fix the warpage by filing, and removed the sealing ridge. If you straighten the castings you will stop the leak, at least for a couple of years.
Jon.
Thanks Jon. I have checked and the sealing ridge hasn't been filed (shudder) but I'll have to check to see if there's any warpage. What's the best way to straighten the castings? It seems that they usually will leak at the same point on these carbs. Usually on the front side. Thanks again Jon, -Tim "Doc"
