Inliners International Forums General Discussion Drive Train I really need a flywheel and pressure plate

I am looking for a pressure plate that will fit my 10 3/4" flywheel. I also would be intersted in a 10" flywheel and pressure plate if that is easier to find. This will be bolted to a Chevy 235. Please let me know what the price is.

Thanks,
Dan Nelson

You will need to be more specific.

6v or 12v??

6 bolt or 9 bolt pressure plate?

Dear Dan;

What year engine is this all going on??

You should be able to take your flywheel to the parts store & get a match.

You'll probably want to surface the flywheel & ballance things too.

Good luck, John M...

i have a 62 flywheel, 6 bolts on the crank, 6 bolts around the pressure plate, disc measures 10", has 5000 miles on remaned disc and plate.

why not do it the hot rodder way get the clutch and pressure plate and get the flywheel drilled and taped to use it.

I suggest replacing the flywheel. Thats what I did on my 46 truck/54'235. I was given the flywheel and once that put me in the 50's for parts, Everyone had parts to give away.Those parts are common and plentiful. The 12"fly was a straight swap.