Talles,
Walt is correct. There's not need to hang your brake assembly. It's unsightly and not the easiest thing to do.
Check with Zig's company. They provided me with a simple and straight forward method. I used a 7" power booster/dual master set-up that bolts on to your existing under floor unit. You have to gut your old system and they provide a long rod that actually goes thru your old master bracket and attaches to your existing pedal set-up without moving anything. A lot of thought went into this system to make it a true bolt on. Don't try to re-invent the wheel here, it's already been thought out by rodders. The master cylinder under the floor has enough space to check the level and add fluid without cutting a hole in the floor.
I also purchased their Mustang II Hub-to-Hub front IFS that included 11" discs, 2" dropped spindles that work really nice.
Good Luck and keep us informed on your project.
RapRap
1940 ChoppedChevyCoupe
