The fabbed up throttle cable bracket attaches to both rear carb studs. You just can't see it from this shot. And I don't have another pic that does show it.
I haven't changed my carb any. It's right out of the box. This carb would be a perfect fit right out of the box for a stock 283 or 327 so it's just about right for the 292.
My HEI distributor has new components and the timing has been advanced a little to help performance. I get no black smoke on revving the throttle or at idle. A little on startup. I could probably do a little better by stepping down the primary jets one step and/or a metering rod and spring change but for now I'm going to leave things as is.
Sorry. I don't have any numbers for either of the cables. The Lokar cable was the 24 inch stainless braided type and Pep Boys (or autozone, whichever I bought it from) only had one type of black vinyl throttle cable. Runs about 20 bucks.
I'll try to get a shot of my new setup when I get a free minute.
-magic mike-
