For John: I don't have a digital cam or scanner that works so I can't post a pic here for you or else I would. I don't mind taking a regular 35mm pic and snail mailing it to you if that works for you. All the bracket is that holds the throttle cable is basically an L shape with the vertical leg twisted 90 degrees for the cable housing fitting to pass through. The base of the L simnply slips over the carb mounting stud before you add the lockwasher and nut. A second L bracket without the twist is welded upside down to the base of the upper one. This keeps the whole thing from turning by resting against the base of the carb and the dropped down leg of the L has a hole for the throttle return springs.
Picture an L with a 7 underneath it, the base of the L and top of the 7 on top of each other, welded together and then drilled for the carb stud. Sort of ends up looking like a T on its side except for the twist in the upper part.
If you want a pic or two just email me with your address. Add Inliners to the subject line as I have a killer spam blocker that lets nothing through!
Mike
bibb31@earthlink.net
