efi-diy
You have a good idea there But the Demand Is not there and It would be Very coslty to make a head. It's cheaper to cut and Weld to Heads together Then it would be to Have one made. And You do need to redill the blocks for The hybread Head(2V8 heads)You Also Need to Fab Up a Lifter Side cover Because of the V8head. So to have a Head Made like a V8head If you didn't redesign for the Push rods to fit the Block the right way You'd still have to Fab a side cover. SO again Still cheaper to Cut and weld two. Hope this helps.
}[oooooo]
God doesn't like ugly.
