Hi Larry,
You might be thinking about a thin Teflon coating on the metal to help it shed oil (?). You can buy that type of Teflon coating from a number of places if you want to apply it yourself or have it sent out to a coatings shop. Not a bad idea. The Teflon scrapers we make use a solid sheet of Teflon held in place by clamps. That is something new (hence our Patent Pending) and allows the scraper to safely come into actual contact with the rotating assembly. After it beds in you have a scraper that runs with about .001" clearance.
Kevin
Originally posted by Twisted6:
Your Welcome Kevin
These photos are without the teflon on the scrapers? any of the Vthing scrapers Ihave ever seen all had the teflon. Is that Not realy needed?
#3220 }[oooooo]
