I noticed that the carb didnt come with the linkage for the throttle . So I did some backyard fabricating .
The throttle on this carb is on the opposite side as my Holly .
I used some 5/8 X 1/8 aluminum flat stock .
Its going to be hidden under the air filter in the rear of the carb . tested it & it works well ! Now I have to rebuild it . Just for schidts & Giggles I started it to see what it would do & it PUKED fuel all over through the throttle body before it started but Before I could turn the key off , it fired up . so I know it works . Just going to rebuild it soon now .
Making the linkage reminded me of working on my old Oliver tractor A few years back .
Well , I will put the photos in my webshots , I couldnt find A donor carb at the wrecking yards today so I did the best I could without the proper tools (FARM STYLE).
let me know what you think . I was just bored . Will be looking for the correct linkage , but until then this wil do .
http://community.webshots.com/user/blunderbustr
