If your running a manual transmission or non lockup automatic transmission then the only parts that need to be added to the board are 2 resistors and 1 diode. I'll install these tomorrow.

So the parts that get installed for a manual transmission or non lockup automatic transmission are:
The GM connector
the megasquirt connector
2 relays
2 resistors
1 diode...

for a lock up automatic add:
1 transistor
2 more resistors.
1 more diode

Assembly time for the adapter board is 30 min's for someone who has built an electonics hobby kit before and most likely 60 min's for a newbie. Its really not that hard.

M.

51 GMC 4.2 turbo
Can't solved today's problems using the same technology/thinking that created them