|
|
|
|
Joined: Nov 2004
Posts: 25
Active BB Member
|
OP
Active BB Member
Joined: Nov 2004
Posts: 25 |
Im just curious if I could put an MSD Ignition on my stock 250 with out any problems.
sry if this is a stupid question. Im young and still learning lol
Well, me... it's nice talking to myself
A credit to dementia
Some day you too will know my pain
And smile its blacktooth grin
If the war inside my head
|
|
|
|
|
Joined: Mar 2004
Posts: 757
Major Contributor
|
|
Major Contributor
Joined: Mar 2004
Posts: 757 |
Your 79 Nova 250 should have come with an HEI from the factory. As it is it is a pretty good distributer to start with. It has the coil built into the cap and shares the same coil and module as the V8 HEI's. For a street engine you can replace the stock module with an MSD that drops right in and you can replace the stock coil with a hi output coil from MSD. Replace the cap and rotor with new and make sure you buy a cap with brass contacts inside instead of the cheapo steel contacts.
For the street I like to use Taylor Spiro Pro wires. You'll have to buy a universal set and they only come in boxes for V8 engines so you either end up with 2 spare wires or 2 practice wires depending on how things go. To get an idea what all these parts are check out Summit or Jegs on line. They both carry MSD and Taylor. Look for the parts that go on a small block Chevy HEI.
Have fun,
Mike
Mike G #4355
|
|
|
|
|
Joined: Nov 2004
Posts: 25
Active BB Member
|
|
OP
Active BB Member
Joined: Nov 2004
Posts: 25 |
thx for the response on here and my other post. Yea i didnt realize that they only come for 8 cylinders. Im still kind of learning how all this stuff works but I figured the best way to learn is to ask questions. thx
Well, me... it's nice talking to myself
A credit to dementia
Some day you too will know my pain
And smile its blacktooth grin
If the war inside my head
|
|
|
|
|
Joined: Jun 2002
Posts: 315
Contributor
|
|
Contributor
Joined: Jun 2002
Posts: 315 |
With every 3 V8 sets, you get a 4th L6 set free! Save the longer wires out of the V8 set and you will be ready to go. 
I/I #4101
'71 GMC Jimmy 350, sm465, np205,3.73 posi.
'68 C/10 Stepside 292 (.030 over) Offy Intake, 500 CFM AFB,Clif headers, sm465, 3.73 posi.
'67 K/10 454 project.
'72 K/5 rolling frame project.
|
|
|
|
|
Joined: Nov 2004
Posts: 25
Active BB Member
|
|
OP
Active BB Member
Joined: Nov 2004
Posts: 25 |
Ill do that and then sell them on ebay... lol
Well, me... it's nice talking to myself
A credit to dementia
Some day you too will know my pain
And smile its blacktooth grin
If the war inside my head
|
|
|
|
|
Joined: Mar 2004
Posts: 757
Major Contributor
|
|
Major Contributor
Joined: Mar 2004
Posts: 757 |
Why not just hang on to them? As you build up various 250 inch engines order the parts sets for a small block Chevy. You'll end up with extra pistons, rod bearings, valve springs, and rocker arms. Your 4th 250 will cost next to nothing to build as compared to the first 3. LOL - have fun with the car. Mike
Mike G #4355
|
|
|
|
|
Joined: Mar 2002
Posts: 195
Contributor
|
|
Contributor
Joined: Mar 2002
Posts: 195 |
I to perfer Taylor wires but this maybe of help. You can purchase Accel wires for the 232/258-6 cylinder CJ7 Jeeps. They should work fine on the Chevy motors with Orignal,Mallory and Msd distribtors.The wires for the 84-86 4.9(300/6) Ford motors should work on the Chevy HEI distribtors. Paul
BAN LOW PERFORFMANCE DRIVERS.....
NOT HIGH PERFORMANCE CARS!!
|
|
|
|
0 members (),
611
guests, and
56
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
