Hello...I'm working on a 55 second series chevy pickup. When I started it the lower door hinge pin was broken, the front of the hinge pocket was rusted out, the kick pannel below the fresh air grill was gone as well as 1/2 of the passenger side floor board.
Well I rebuilt the hinge pocket and replaced the hinge pins as well as the floor and kick pannel.
I remounted the door and can't get it ajusted.
It is too far in at the top (touching metal to metal) and too far out at the bottom (3/4 inch gap to door jamb). I have the top hinge as far out as it can go in the door pillar and the lower one is all the way in.
The question is...Is am I trying ot ajust it incorrectly or has all the rust damage allowed the cab to tweek out of shape?
Anyone with experiance with thease cabs please help...I need to know if its worth starting on the drivers side...Thaks for your input.
