Thanks JMoran, I appreciate your guidance.I went to the Dupli-Color web site and it was worthless as far as help goes and which product is best.It does seem the epoxy primers are the most protective from rust, but don't they require sanding to give tooth for fillers that are added on top which is what I will be doing?
I went to the PPG store and they can formulate my color,a light solid yellow, after using their special camera. Their price is about $40 for 1/2 pint,(8oz.)plus reducer and hardener. Total is about $100. Then my compressor is a 20gal. unit I used for roofing and running nailguns. They suggested a small hvlp gun. I forget the brand.
It would be nice to do it myself and maybe a section at a time.
