Well thanks Ken B. Well the car/Motor has been very good to me for the last 17yrs thats when i built that motor was 17yrs ago. and Time for a new build. That motor still runs at 30 psi at idel and around 60 psi on the top end. The car has been mentioned a few times in the 12 port. But Yes the New motor may very well end up in the 12 port once i finish the Lump port tech for the 12 port Because some of the pictures for the tech well becomeing from a cut up head and The head that will end up on the new motor.
I should be done with both in a few Mos. so keep a eye out for it.
Again Thanks To every one here who has voiced there imputs about my web site and Postings here. I also have a small artical that should be coming up in a issue of the 12 port Which is a little bit about myself and how I came about becomming a inliner Full Time. But anyway so for the long windedness. But I'm just glad to help. And you all know That I tell it straight up and Pull no punchs And I surely don't deal No BS And I do my best to keep all inline on and off the board.
Tc= take care have fun }[oooooo]
------------------
NovaMan/Twisted6/Larry
God doesn't like ugly.
