I used the motor mounts from Stovebolt engineering. They worked out great. I did some very careful measuring and have the 292 as far back and low in the chassis as possible. Only 1/4" firewall clearance. with the shorter water pump, i have enough clearance to put the electric fan either behind or in front of the radiator. I'll get the pump info for you ASAP. Electric fans are all over the hot rod magazines. Pick up Street RoD Builder or street rodder and you'll find several companies. I hear of a brand new company that has the lowest profile 16" fan. It's only 1" deep and the electric motor is offset to the right or left of the block for perfect clearance! I'll try to get that info and post it for everyone. If you need jpgs of my installation, let me know and I'll send them.
RAPRAP
