Inliners International Forums General Discussion Blown and Injected turbo 292 write up

hank, i'll check how much boost i can build while braking.

i did find a problem though. in the shop i triggered the fuel pump relay and measured the voltage to the pump at the pump. it was 10.7 @ 55 psi. so i changed all the wiring to a larger guage and retested. had 11.8 with no motor running and 12.5 @ battery. it is better and the pump sounds it too. i have yet to try it on the road to see if it makes a difference. measured up what back spacing i can use with a 8 " rim. will order those tomorrow.
my fuel pump is a holley 12-920 which is a 480pph pump. it should be more than sufficient. and is quiet. tom