Thanks for your replies.
Larry, I will PM you. My valve cover has a small hole,you can just see it in the pic. I figured I could use this for the PCV. My manifold has a center outlet which I think will supply vacuum or couldn't I pull the vacuum off the carb? As for the balancer, I figured my current one would be
unsuitable after so many miles, but maybe not. Another concern I have is where I'm going to put my temp sender. I thought I had a hole in my head on the drivers side(according to Leo's book) but it's not there. I may be in need of a thermostat housing with the three outlets. Any suggestions?
Thanks again,
Chris
