Hey trump
I was playing with my free camQuest (i have CD on the way) So i should have some better tools to use.But anyway all I could go with a 250 or smaller could not get the 292 into the Free software.
But this is what I cam up with BOTH cams you showed from comp.
9-1 compression,A Lump ported head(1.94int & 1.6 exh.) 500 cfm 4b carb small tube headers with Mufflers.The 252 -474 lift(232-4 252H) cam neted in about 220 hp @ 4500 RPM peak torque 280 ftlb @ 3500 rpms.
The 233-4 260H---- 260 - 489 lift. peak HP about 236 @ 5000 rpm
Peak torque 283 @ 4000 rpms
Mind you these are for a 250 and is only a close guess. the 292 would surely have a different out come. It was only to give you
a better idea as to what you mite????????? be looking at.
Ps a 230 came close to having the same numbers (hp & torque)a 194
came out just a hair over 200 hp with 9-1 compression
a 194 with 10-1 came up right around 230hp?????? this was with
the 260H cam. small tube headers & muffler interesting. But it was at 5500 rpm Which is Over the cam rpm band specks which is
1000-5000 rpms even more interesting HUH????