The will inner change. I agree with the above.It is always best to change The Gear. I have Ran Both The stock Gear and bronze With a High volume pump without any issues But The stock oil fine. A High volume pump is not really Needed Not even in a HP motor.And many say It does add more strain on the Dist gear. ONE other Question I have is The Gear You had installed on the New Cam Is it alum? And was it Heated before installing it on the cam? OR is it bolted to the cam. If NOt It May have walked Of the End of the Cam And this WILL cause Problems with the Dist Gear making it Fail before its time It can also Mess up the Dist it self. Been There Done That.When a Cam walked On me Many Years ago(17yrs)
Hope this helps }[oooooo]
Ps You may???? want to remover the timing cover to check the Gear and also The bolts that Hold the cam plate in place.check the plate it self to make that Is not broken.
God doesn't like ugly.
