The fork angle on 49-54 cars (and sedan deliveries) is unique, and the linkage design doesn't work like it should with a fork angle that is different, namely the near horizontal one on your 292.
My solution will require the original '53 fork and the part that bolts to it in order to work.
Of course, this all assumes you are still using the original under the floor pedal setup.
If you are using a 153 tooth flywheel, it should be 10 1/2" not 10" ???
Yes, the 292 flywheel will work. If it had the clutch disc and pressure plate as well, make sure you verify the outside diameter of the disc before ordering...
