I spent a lot of time trying to locate "new" 292 P/S brackets and found that GM discontinued them years ago .
A good source to find them used is a K-series GM truck with a 292 from 1973 to the mid eighty's . The 4x4's came standard with P/S and the 292 was an option in 3/4 & 1 Ton trucks.
I have seen GM parts books list the 292 as recent as 1989 but they were in the "P" series Panal Van Chassis' .
I have had to buy a complete junked truck just for the brackets and accessories for the 292 .
There are a few different brackets available for the 3 groove harmonic set up - one style positions the P/S pump at the top driver side just to the side of the exhaust manifold and another set up positions the pump way off to the drivers side because of the smog pump in the original P/S pump locarion.
If I had a digital camera I would take pictures for Ya"ll - sorry , I am not that up to date.....
I have found that some 250 P/S brackets will work on a 292 if the correct altenator brackets are used . Usually the 292 alt. bracket will raise the alt. upwards so that the other brackets line up like other 250 set ups .
HTH's , Tom
