I believe that was just an offset spacer.
I am not sure it will work or not, so ask people & see if it will fit to be sure. His spacer moves turbo up & outwards.

You could use spacers on the engine mounts to raise engine & clear the steering shaft.Not my first choice,but would work.

Install a rack & pinion steering set-up.

The 3 spd saginaw trans has poor gear ratios,,, but, if you must.
Last thing, sometimes our 6's are not the fastest as compared to those V-thingys, so putting your car on a diet is always good.

MBHD


12 port SDS EFI