Thanks to everyone for the nice compliments on my truck. It has been both a lot of work and a lot ot enjoyment.
The subject of full flow oil filters for 235s and remote oil filters for 261s has been addressed by lots of folks before. I just took what they have done and applied it to my truck. The filter bracket was of my own design and fabrication and I picked up the remote filter setup at a local swap meet for $15.00. The oil lines came with the filter. The fittings are just standard fittings you can get at any good hardware store. As far as how far to drive the plug in goes, what I did was I took a drift that was approximately the sme diameter as the plug and I went very slow and easy. It took a little more effort than I thought it would to get it moving, then I went easy until I felt resistance and then I quit at about 1/2". Here are a couple of links that will help with your installation.
http://www.stovebolt.com/bboard/cgi-bin//ultimatebb.cgi?ubb=next_topic;f=2;t=003678;go=older http://www.speedprint.com/Deves50/OilFilterInstall.html As always if there is anything else I can do to help, please let me know.
57 Mike
