Sorry for the puns,
Try some late model cable&pedal arrangements-all you gotta do there is to make a brkt to hold the cable housing in position to allow the actuating cable to do its job. A brkt could be made out of something as light as # 14 ga. flat stock and held down by a carb mounting bolt, or a seperate mounting plate sort of a "porch" for the brkt to sit on, again secured by one or more carb bolts-just so the cable's housing dont move in relation to the carb. No bell cranks, pulleys or voodoo there, just be sure to use a return spring.
Last edited by preacher-no choir; 03/26/12 03:18 AM.
