His is in the process of building a purpose built 65 Elky for drag racing.
Even if the Elky does just spin the tires, the MPH will show the HP it is making & IIRC, the best MPH it ever made was 98 or 99 MPH.
Guys have made more power from a 250 turbo engine, so of course 450 HP is attainable from a 292, even N.A 292 engine can.
Heck, Tlowes turbo 250 made good power w/only 5 psi 340 HP?
Tlowe already had dynoed & published the results.
Are there more dyno results not published?
All I keep seeing is it makes 450 HP on posts here.
He does not have to prove anything, but if someone states Tlowes 292 makes 450 & runs low 14's last time @ the track w/dyno results of
"1st run 235 hp @ 4550 rpm torq was above 300 from 2700-4700 rpm. max tq was 320
2nd run 243 hp with 1 more degree of timing 26 total
3 rd run 240hp @ 27 degrees timing."
it's a little hard to imagine the posts here are spot on.
With those dyno results, it is making about what his turbo 250 engine made, so it seems. About 340 HP @ the crank?
I think he is making 350-400 ft lbs of torque.
MBHD
