DeuceCoupe,
I actually get full boost before peak torque.
When I brake stall it, I will get full boost by about 2500 RPM or there abouts. I would need to review my data logs as the boost comes in so fast it is really hard to watch exactly when the full boost actually happens.
The 604 ft lbs is what it is making w/the torque multiplication of the torque converter. Then it seatles down & drops down about 450 ft lbs by max RPM 4500 w/power.
So with all the inputs you needed, what should my Syclone run next time out?
Sorry for hijacking the thread.
MBHD
