Suprise on me....

The Galvins "RV" cam is installed and dial indicated...All new
valves and a .040" mill job on the head....Just got done
indicating the cam....Everything ready for startup except for
installing the valve cover............
Guess what? The fricken cam dials in with the same spec's as
the stock cam... .382" lift....The cam card says .409" valve
lift...........Somehow I was shipped a stock replacement cam
with an RV cam card....Doug Galvin will make good on the cam
but, what a waste of labor.........Some days you eat the bear.
Some days the bear eats you.......
One last thing....a valve lift of .410" is pretty much the limit
with stock springs and guides...Coil bind occurs at .450" with
stock springs...Something to keep in mind..

Last edited by Melon; 01/23/13 11:15 PM. Reason: More Info