How Far Down Are Pistons in Bore on 250 at TDC?

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: How Far Down Are Pistons in Bore on 250 at TDC? Mean buzzen half dozen A.K.A. Hank #74887 04/25/13 09:39 PM
Joined: Oct 2007 Posts: 43 San Diego, CA C chevymike OP Active BB Member
OP chevymike Active BB Member C Joined: Oct 2007 Posts: 43 San Diego, CA	Okay, I am at a loss... I checked the crank number and is shows in the book as a 250 crank (460407). Rod measured 5.7" Pistons are marked 040 and the bore shows it to be .040 over stock. Top of piston to center of wrist pin is 1.64. How can the pistons be sitting so low in the bore?

Entire Thread
Subject	Posted By	Posted
How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/25/13 11:54 AM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	CNC-Dude #5585	04/25/13 01:43 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/25/13 03:48 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	stock49	04/25/13 07:43 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	Mean buzzen half dozen A.K.A. Hank	04/25/13 09:03 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/25/13 09:39 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/25/13 09:56 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	bcowanwheels	04/25/13 10:45 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	bcowanwheels	04/26/13 12:35 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/26/13 01:25 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/26/13 01:36 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	CNC-Dude #5585	04/26/13 01:52 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/26/13 05:05 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	Twisted6	04/26/13 05:48 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/26/13 06:17 PM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	6-bangertim	04/28/13 12:20 AM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	chevymike	04/28/13 02:41 AM
Re: How Far Down Are Pistons in Bore on 250 at TDC?	bcowanwheels	04/29/13 01:45 AM

Link Copied to Clipboard

Inliners International Forums General Discussion Engines How Far Down Are Pistons in Bore on 250 at TDC?