Hey Ducky,
I have tried over the past year(slowly and when it was warm enough up here in Canada) to get iot to run, I had it turning over but no fire, my compression was less than 10lbs on every cylinder, so I popped the head off just last week and poured solvent on top of the pistons and it all ran past the rings on all cylinders. This is why I have come to the decision that the motor is coming out.
I have done all the brakes and most of the body work(i do what I know best) I rebuilt the carb as well and I can definately get thos parts
I would like to "Hop it up" while I have it apart a bit, is there anything I can do?
The tranny is manual, 3 on the tree, should I just leave it in the car and not pull it with the motor?(I assume there is only 15000 on it as well)
Should I change the gear ratio in the rear end? is this something I would do now? BTW how do I do that?
